Network optimization information:

The meaning of electromagnetic general formula;

Bit: refers to the position of the actuator after the action, usually 2 or 3 bits, etc.

Through: the solenoid valve has a few holes, a few holes is a few. They are combined into one and are called several - position - several - way solenoid valves.

Diameter refers to the diameter of the mechanical solenoid valve interface is generally G1/4, 1/4NPT, G1/2, 1/2NPT, which is connected to the diameter of the cylinder. Diameter refers to the actual diameter of the safety solenoid valve, such as G1/4, 1/2, 1/2NPT, which is 2 mm, 5 mm, 6 mm and 8 mm respectively. The larger the diameter, the greater the circulation capacity of the diameter. In addition, a "1/4" inch taper pipe thread can be seen. The tooth Angle is 55°, the pitch is 1.337 mm, the outer diameter is 13.158 mm, and there are 19 NPT1/4 threads per inch. The tooth Angle is 60° and the taper is 1°. 16, pitch 1.411mm, external longitude 13.616mm, 18 pieces per inch.